Learn How To Make A Shield Like The Vikings| Kids Activities Blog

0
Loading...

Has your child ever tried to figure out how to make a shield for protection in a pretend battle?

Here are some easy steps on making a very sturdy Viking shield. At Kids Activities Blog, we strive to give you and your child cool hands-on activities like these. 

Loading...

How To Make A Shield

Making a cardboard shield is actually super easy and a lot of fun. This DIY Viking shield will help not only give your child a creative outlet, but it could also be a fun time to have a bit of a history lesson as well.

Not to mention, when the shield is actually crafted it will promote pretend play as your little one will be ready to dive into battle to fight all the invisible bad guys!

Supplies Needed To Make A Shield:

A lot of these materials you may have already around the house. If not, they are easily found and even easier on the budget! Which is always a plus. Don’t have time to run out? No problem! We can help. (This post contains affiliate posts.)

Loading...
Materials Needed:
  • Large piece of sturdy cardboard or foamboard
  • Scissors or box cutter to cut board
  • Materials to color the shield such as paint, heavy construction paper, aluminum foil
  • Colored tape such as duct tape, painters tape, or electrical tape
  • Two 1/4 inch bolts with round head and flat end (not pointed)
  • Four washers
  • Four nuts
  • Small strip of fabric for handle

How To Make A Viking Shield:

Instructions:
Step 1

Use the scissors or box cutter to cut the board into two circles with one much smaller than the other.

Step 2

Color each circle. My son used green bulletin board paper for the large circle, and aluminum foil for the small circle.

Loading...
Step 3

Decorate the large circle with stripes using the tape.

Step 5

Next you will attach the handle. Punch two holes in the small circle for the bolts.

Loading...
Step 6

Line up the small circle with the center of the larger circle and punch two holes in the large circle that match the holes in the small circle.

Step 7

Put a washer on each bolt and insert it into a hole on the front of the shield making sure that it goes through both pieces of board with the smaller board on top. Repeat with the second bolt.

Step 8

Line up the strip of fabric with the two holes and punch the holes in the fabric.

Loading...
Step 9

On the back side of the shield, attach the fabric to the shield by placing it on the two bolts.

Step 10

Add a washer and nut to each bolt.

Step 11

You can decorate the front of the shield a little more or just call it done.

Loading...

Finishing The Cardboard Shield

I had hoped my son would make a classy looking shield with just two basic stripes on it but he loved decorating with the different colors of tape and went a little crazy with it. I’m glad he had so much fun and customized his shield just the way he wanted it.

How to make a viking shield with cardboard and paper - Kids activities blog

Has your child ever tried to figure out how to make a shield for protection in a pretend battle? Here’s how to make a very sturdy Viking shield.

Loading...

Materials

  • Large piece of sturdy cardboard or foamboard
  • Scissors or box cutter to cut board
  • Materials to color the shield such as paint, heavy construction paper, aluminum foil
  • Colored tape such as duct tape, painters tape, or electrical tape
  • Two 1/4 inch bolts with round head and flat end (not pointed)
  • Four washers
  • Four nuts
  • Small strip of fabric for handle

Instructions

  1. Use the scissors or box cutter to cut the board into two circles with one much smaller than the other.
  2. Color each circle. My son used green bulletin board paper for the large circle, and aluminum foil for the small circle.
  3. Decorate the large circle with stripes using the tape.
  4. Next you will attach the handle. Punch two holes in the small circle for the bolts.
  5. Line up the small circle with the center of the larger circle and punch two holes in the large circle that match the holes in the small circle.
  6. Put a washer on each bolt and insert it into a hole on the front of the shield making sure that it goes through both pieces of board with the smaller board on top. Repeat with the second bolt.
  7. Line up the strip of fabric with the two holes and punch the holes in the fabric.
  8. On the back side of the shield, attach the fabric to the shield by placing it on the two bolts.
  9. Add a washer and nut to each bolt.
  10. You can decorate the front of the shield a little more or just call it done.

Love Making A Viking Shield? Then You’ll Love These Ideas!

viking longship craft

So now you know how to make a shield. What will you do with this cool Viking shield? Here are a few other kids activities that might go along nicely with it:

Loading...

Make A Viking Longship

Know How To Make a Shield? Make this Sword.

Test Your Viking Shield with These Pool Noodle Light Sabers

Loading...

Check out these 18 boat crafts! They can all float which makes them super cool!

Don’t want to be a Viking? What about a princess knight?

Every princess knight needs a castle! Check out this castle set.

Loading...

Stay connected with us on social media platform for instant update click here to join our  T

Has your child ever tried to figure out how to make a shield for protection in a pretend battle?

Loading...

Here are some easy steps on making a very sturdy Viking shield. At Kids Activities Blog, we strive to give you and your child cool hands-on activities like these. 

How to make a shield

How To Make A Shield

Making a cardboard shield is actually super easy and a lot of fun. This DIY Viking shield will help not only give your child a creative outlet, but it could also be a fun time to have a bit of a history lesson as well.

Not to mention, when the shield is actually crafted it will promote pretend play as your little one will be ready to dive into battle to fight all the invisible bad guys!

Loading...

Supplies Needed To Make A Shield:

A lot of these materials you may have already around the house. If not, they are easily found and even easier on the budget! Which is always a plus. Don’t have time to run out? No problem! We can help. (This post contains affiliate posts.)

Materials Needed:

How To Make A Viking Shield:

Instructions:
Step 1

Use the scissors or box cutter to cut the board into two circles with one much smaller than the other.

Loading...
Step 2

Color each circle. My son used green bulletin board paper for the large circle, and aluminum foil for the small circle.

Step 3

Decorate the large circle with stripes using the tape.

Loading...
Step 5

Next you will attach the handle. Punch two holes in the small circle for the bolts.

Step 6

Line up the small circle with the center of the larger circle and punch two holes in the large circle that match the holes in the small circle.

Step 7

Put a washer on each bolt and insert it into a hole on the front of the shield making sure that it goes through both pieces of board with the smaller board on top. Repeat with the second bolt.

Loading...
Step 8

Line up the strip of fabric with the two holes and punch the holes in the fabric.

Step 9

On the back side of the shield, attach the fabric to the shield by placing it on the two bolts.

Step 10

Add a washer and nut to each bolt.

Loading...
Step 11

You can decorate the front of the shield a little more or just call it done.

Finishing The Cardboard Shield

I had hoped my son would make a classy looking shield with just two basic stripes on it but he loved decorating with the different colors of tape and went a little crazy with it. I’m glad he had so much fun and customized his shield just the way he wanted it.

How to make a viking shield with cardboard and paper - Kids activities blog

Loading...

Has your child ever tried to figure out how to make a shield for protection in a pretend battle? Here’s how to make a very sturdy Viking shield.

Materials

  • Large piece of sturdy cardboard or foamboard
  • Scissors or box cutter to cut board
  • Materials to color the shield such as paint, heavy construction paper, aluminum foil
  • Colored tape such as duct tape, painters tape, or electrical tape
  • Two 1/4 inch bolts with round head and flat end (not pointed)
  • Four washers
  • Four nuts
  • Small strip of fabric for handle

Instructions

  1. Use the scissors or box cutter to cut the board into two circles with one much smaller than the other.
  2. Color each circle. My son used green bulletin board paper for the large circle, and aluminum foil for the small circle.
  3. Decorate the large circle with stripes using the tape.
  4. Next you will attach the handle. Punch two holes in the small circle for the bolts.
  5. Line up the small circle with the center of the larger circle and punch two holes in the large circle that match the holes in the small circle.
  6. Put a washer on each bolt and insert it into a hole on the front of the shield making sure that it goes through both pieces of board with the smaller board on top. Repeat with the second bolt.
  7. Line up the strip of fabric with the two holes and punch the holes in the fabric.
  8. On the back side of the shield, attach the fabric to the shield by placing it on the two bolts.
  9. Add a washer and nut to each bolt.
  10. You can decorate the front of the shield a little more or just call it done.

Love Making A Viking Shield? Then You’ll Love These Ideas!

viking longship craft

Loading...

So now you know how to make a shield. What will you do with this cool Viking shield? Here are a few other kids activities that might go along nicely with it:

Make A Viking Longship

Know How To Make a Shield? Make this Sword.

Loading...

Test Your Viking Shield with These Pool Noodle Light Sabers

Check out these 18 boat crafts! They can all float which makes them super cool!

Don’t want to be a Viking? What about a princess knight?

Loading...

Every princess knight needs a castle! Check out this castle set.

Stay connected with us on social media platform for instant update click here to join our  Twitter, & Facebook

Loading...

We are now on Telegram. Click here to join our channel (@TechiUpdate) and stay updated with the latest Technology headlines.

For all the latest Education News Click Here 

 For the latest news and updates, follow us on Google News

Loading...

Read original article here

Denial of responsibility! TechAzi is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.

com/TechiUpdate” target=”_blank” rel=”nofollow noopener noreferrer”>witter, & Facebook

We are now on Telegram. Click here to join our channel (@TechiUpdate) and stay updated with the latest Technology headlines.

Loading...

For all the latest Sports News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Loading...
Denial of responsibility! TechAzi is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More